B2060

PRE-COLLISION: PRE-COLLISION SYSTEM: B2060: ABS Malfunction

DTC B2060 - ABS Malfunction

DESCRIPTION

This DTC is output when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU to the seal belt control ECU through the CAN line.






INSPECTION PROCEDURE
NOTICE:
When the seat belt control ECU is replaced with a new one, Active Test must be performed Pre-Collision System.

PROCEDURE

1. CHECK FOR DTC
(a) Delete the DTC Pre-Collision System.
(b) Check for DTC.

Result:





D -- REPLACE SEAT BELT CONTROL ECU
C -- GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
B -- GO TO CAN COMMUNICATION SYSTEM
A -- END