Electronically Controlled Brake System

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

DIAGNOSTIC TROUBLE CODE CHART
HINT:
- If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
- Inspect the fuses and relays before investigating the trouble areas as shown in the table below.

DTC chart of ABS

DTC C0200/31-C0205/32:

DTC C0210/33-C1235/35:

DTC C1236/36-C1244/44:

DTC C1245/45-C1442/44/U0124/95:

HINT:
- In some cases, the Techstream cannot be used when ABS warning light remains on.
- When U0073/94, U0293/59, U0123/62, U0124/95, U0126/63, U0130/68 or U0131/67 is output, inspect and repair the trouble areas indicated by these codes first.
- Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed.
1 Drive the vehicle at a speed of 50 km/h (31 mph) and depress the brake pedal strongly for approximately 3 seconds.
2 Repeat the above operation 3 times or more and check that the ABS warning light goes off.
3 Clear the DTC.

DTC chart of VSC