Removal

L110 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal
4. REMOVE SHIFT LEVER KNOB





(a) Twist the shift lever knob in the direction indicated by the arrow and remove it.
5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
6. REMOVE UPPER CONSOLE PANEL ASSEMBLY Removal
7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
8. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
9. REMOVE CONSOLE BOX PLATE Removal
10. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
11. REMOVE CONSOLE BOX ASSEMBLY Removal
12. REMOVE NO. 2 CONSOLE BOX DUCT Removal
13. REMOVE HEATED OXYGEN SENSOR
(a) Remove the heated oxygen sensor Removal.
14. REMOVE FRONT FLOOR BRACE CENTER Removal
15. REMOVE REAR FLOOR NO. 1 PANEL BRACE Removal
16. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal
17. REMOVE FRONT FLOOR COVER CENTER RH





(a) Remove the 3 grommets, and front floor cover center RH.
18. REMOVE FRONT FLOOR NO. 1 HEAT INSULATOR Removal
19. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) Remove the nut and separate the floor shift gear shifting rod sub-assembly.
20. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY





(a) Disconnect the 2 connectors.
(b) Disconnect the 6 clamps.
(c) Remove the 4 bolts and floor shift assembly.