Removal

2UR-FSE EXHAUST: EXHAUST MANIFOLD: REMOVAL

REMOVAL
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

4. REMOVE SERVICE PLUG GRIP Removal
5. REMOVE ENGINE AND TRANSMISSION
(a) Remove the engine and transmission Removal.
6. REMOVE FRONT FRAME ASSEMBLY Removal
7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal
8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR





(a) Remove the 3 bolts and heat insulator.
9. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR





(a) Remove the 3 bolts and heat insulator.
10. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal
11. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH Removal
12. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH Removal
13. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH





(a) Disconnect the air fuel ratio sensor connector.





(b) Remove the 8 nuts and exhaust manifold RH.
(c) Remove the gasket.
14. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH





(a) Disconnect the air fuel ratio sensor connector.





(b) Remove the 8 nuts and exhaust manifold LH.
(c) Remove the gasket.
15. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)





(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
SST: 09224-00010
16. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)





(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST: 09224-00010