Ignition Relay No. 2

2UR-FSE ENGINE CONTROL SYSTEM: IGNITION RELAY NO. 2: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. REMOVE IGNITION RELAY NO. 2 (IG2)
(a) Remove the ignition relay from the engine room No. 2 relay block.





2. INSPECT IGNITION RELAY NO. 2
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the relay.
3. INSTALL IGNITION RELAY NO. 2