Removal

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
5. REMOVE INSTRUMENT SIDE PANEL RH Removal
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
7. REMOVE LOWER INSTRUMENT PANEL Removal
8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
9. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING Removal
10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
11. REMOVE LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH





(a) Detach the 2 claws and remove luggage compartment door opener main switch.