Removal

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP Removal
5. REMOVE DOOR INSIDE HANDLE BEZEL Removal
6. REMOVE SWITCH BEZEL Removal
7. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY Removal
8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH Removal
9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH Removal
10. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH Removal
11. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH Removal
12. REMOVE BACK DOOR TRIM COVER Removal
13. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor) Removal
14. REMOVE REAR LIGHT ASSEMBLY LH Removal
15. REMOVE REAR LIGHT ASSEMBLY RH Removal
16. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
17. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY Removal
18. REMOVE LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH





(a) Open the screw caps and remove the 2 screws.





(b) Detach the 4 claws and remove the opener outer switch.