Removal

INTERIOR: REAR DOOR SUNSHADE ASSEMBLY: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Removal
5. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH [1][2]Removal
6. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Removal
7. REMOVE REAR DOOR TRIM COVER LH [1][2]Removal
8. REMOVE REAR DOOR FRAME GARNISH LH [1][2]Removal
9. REMOVE REAR NO. 2 DOOR FRAME GARNISH LH [1][2]Removal





10. REMOVE REAR CURTAIN SUB-ASSEMBLY LH
(a) Remove the 10 screws.
(b) Detach the 4 clips, disconnect the connector and remove the curtain.