Rear Power Window Switch LH Circuit

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Rear Power Window Switch LH Circuit
- Rear Power Window Switch LH Circuit

DESCRIPTION

This circuit supplies power to operate the power window regulator switch assembly (Rear LH).

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR SWITCH

(a) Disconnect the K4 connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPLACE POWER WINDOW REGULATOR SWITCH
OK -- Continue to next step.

2. CHECK WIRE HARNESS (POWER WINDOW REGULATOR SWITCH - POWER WINDOW ECU)

(a) Disconnect the K3 and K4 connectors.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- END