Active Stabilizer Suspension System

SUSPENSION CONTROL: ACTIVE STABILIZER SUSPENSION SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC (USING TECHSTREAM)

(a) Connect Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Read the DTCs by following the prompts on the tester screen.

HINT
Please refer to the Techstream operator's manual for further details.

2. CHECK DTC (USING SST CHECK WIRE)

(a) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.





SST : 09843-18040

(b) Turn the power switch ON (IG).

(c) Read and record any DTCs indicated by the multi-information display on the combination meter.





HINT
If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

3. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Erase the DTCs by following the directions on the tester screen.

HINT
Please refer to the Techstream operator's manual for further details.