Adaptive Variable Suspension System

SUSPENSION CONTROL: ADAPTIVE VARIABLE SUSPENSION SYSTEM: DTC CHECK / CLEAR

1. DTC CHECK/CLEAR

(a) DTC check

(1) Connect Techstream to the DLC3.

(2) Turn the power switch ON (IG).

(3) Read the DTCs following the prompts on the tester screen.

(b) DTC clear

(1) Connect Techstream to the DLC3.

(2) Turn the power switch ON (IG).

(3) Operate Techstream to clear the DTC.

HINT
Refer to the Techstream operator's manual for further details.

(4) Turn the power switch OFF and Techstream switch off.

2. END OF DTC CHECK/CLEAR

(a) Turn the power switch ON (IG).

(b) Check that the absorber control indicator goes off within approximately 2 seconds.