B1477

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1477/77: A/C Inverter Low Voltage Power Resource System Malfunction
B1477/77 - A/C Inverter Low Voltage Power Resource System Malfunction

DESCRIPTION

The compressor with motor assembly monitors the controlling power voltage in the circuit. It stops the compressor circuit and outputs the DTC when the monitored voltage is outside the specified range.

The output DTC is memorized as a history DTC. The compressor control may not resume unless the power switch is turned off.





INSPECTION PROCEDURE

CAUTION:
* Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Be sure to carry the removed service plug grip because other workers may install it by mistake.
* Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
NOTICE:
The hybrid control system and air conditioning system output DTCs separately. Inspect DTCs following procedure for the hybrid control system first if any DTCs from those systems are output simultaneously.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Result:





B -- GO TO CAN COMMUNICATION SYSTEM Diagnosis System

A -- REPLACE COMPRESSOR WITH MOTOR ASSEMBLY Removal