P0A95

HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM: P0A95-123: High Voltage Fuse
P0A95-123 - High Voltage Fuse

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

CAUTION:
- Before inspecting the high-voltage system, take safety precautions to prevent electrical shocks, such as wearing insulated gloves and removing the service plug grip. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
- After disconnecting the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals.
HINT
At least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.

PROCEDURE

1. CHECK DTC OUTPUT (DTC P0A1F-123 IS OUTPUT) P0A7F

B -- GO TO DTC CHART P0A1F
A -- Continue to next step.

2. CHECK SERVICE PLUG GRIP

(a) Turn the power switch off.

(b) Remove the service plug grip.

(c) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- REPLACE SERVICE PLUG GRIP Components

OK -- REPLACE HV BATTERY ASSEMBLY Components