Pinout Values and Diagnostic Parameters
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: TERMINALS OF ECU
1. DISPLAY AND NAVIGATION MODULE DISPLAY
* *1: w/o Manual (SOS) Switch
* *2: w/ Manual (SOS) Switch
* *3: w/ Rear View Monitor System
* *4: w/ DVD Player
* *5: w/ head-up Display
(a) Reference (Oscilloscope waveform):
(1) Waveform 1 (camera lens is not covered, displaying an image)
HINT
The video waveform changes according to the image from the rear television camera assembly.
(2) Waveform 2 (camera lens is covered, blacking out the screen)
HINT
The video waveform changes according to the image from the rear television camera assembly.
(b) Reference (Oscilloscope waveform):
(1) Waveform 3
HINT
The video waveform changes according to the image input from the radio receiver assembly to the display and navigation module display, but the synchronization signal does not change.
(c) Reference (Oscilloscope waveform):
(1) Waveform 4
HINT
The video waveform changes according to the image output from the display and navigation module display to the multi-display, but the synchronization signal does not change.
Text in Illustration
2. CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Reference (Oscilloscope waveform):
(1) Waveform 6
HINT
The video waveform changes according to the image input from the display and navigation module display to the multi-display, but the synchronization signal does not change.
Text in Illustration
3. REMOTE TOUCH
4. RADIO RECEIVER ASSEMBLY Audio and Visual System (w/ Navigation System)
5. STEREO COMPONENT AMPLIFIER ASSEMBLY Audio and Visual System (w/ Navigation System)
6. PARKING ASSIST ECU (w/ Wide View Front Monitor System) Rear View Monitor System (w/ Wide View Front Monitor System)
7. METER MIRROR SUB-ASSEMBLY (w/ head-up Display) Pinout Values and Diagnostic Parameters
8. MULTI-MEDIA INTERFACE ECU Audio and Visual System (w/ Navigation System)
9. DCM (TELEMATICS TRANSCEIVER) (w/ Manual (SOS) Switch) Safety Connect System