Removal

2AZ-FXE COOLING: WATER PUMP: REMOVAL

1. REMOVE NO. 1 ENGINE COVER

2. DRAIN COOLANT (for Engine) Service and Repair

3. REMOVE V-RIBBED BELT

HINT
Removal.

4. REMOVE WATER PUMP PULLEY

(a) Using SST, remove the 4 bolts and water pump pulley.





SST : 09960-10010

09962-01000

09963-00700

5. REMOVE WATER PUMP ASSEMBLY

(a) Remove the clamp of the crankshaft position sensor from the water pump.





(b) Disconnect the wire of the crankshaft position sensor from the clamp bracket.

(c) Remove the 4 bolts, 2 nuts and clamp bracket.





Text in Illustration





(d) Using a screwdriver, pry between the water pump and cylinder block, and then remove the water pump.





HINT
Tape the screwdriver tip before use.

NOTICE:
Be careful not to damage the contact surfaces of the water pump and cylinder block.