Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE PEDAL STROKE SENSOR: REMOVAL

NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the battery is connected.

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

2. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

HINT
Refer to the procedure up to Remove Driver Side Knee Airbag Assembly Removal.

3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

(a) Disconnect the brake pedal stroke sensor assembly connector.





(b) Remove the 2 nuts and brake pedal stroke sensor assembly.





NOTICE:
Do not drop the brake pedal stroke sensor assembly. If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.