Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly

4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Removal

5. REMOVE DOOR ARMREST COVER Disassembly

6. REMOVE COURTESY LIGHT ASSEMBLY Removal

7. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION Disassembly

8. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

9. REMOVE FRONT DOOR ARMREST SET BRACKET Disassembly

10. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

11. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

12. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY Disassembly

13. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" driver, remove the 3 screws and the front power window regulator motor assembly.