Reading and Clearing Diagnostic Trouble Codes

ENGINE HOOD / DOOR: POWER TRUNK LID SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical/ (desired system) / Trouble Code.

(e) Read the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

(e) Erase the DTCs.