Installation

SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL SUSPENSION CONTROL ECU

(a) Install the suspension control ECU to the bracket with the 2 nuts.





Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

NOTICE:
* Avoid any impact to the suspension control ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.
2. INSTALL SUSPENSION CONTROL ECU WITH BRACKET





(a) Install the ECU with bracket with the nut and bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)





(b) Connect the ECU connectors.

(c) w/o Advanced Parking Guidance System:

Connect the ECU connectors to the clearance warning ECU.

(d) w/ Advanced Parking Guidance System:

Connect the ECU connectors to the parking assist ECU.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL LOWER INSTRUMENT PANEL Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT SIDE PANEL RH Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.6 Nm (57 kgf-cm, 50 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSTALL BATTERY SERVICE HOLE COVER LH Installation

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

13. ADJUST VEHICLE HEIGHT

NOTICE:
If the suspension control ECU has been replaced, be sure to adjust the vehicle height.

(a) Adjust the vehicle height Adjustments.

14. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.

15. ADJUST HEADLIGHT ASSEMBLY

(a) for HID Headlight:

Adjust the headlight Headlight Assembly (for HID Headlight).

(b) for LED Headlight:

Adjust the headlight Headlight Assembly (for LED Headlight).

16. ADJUST OBJECT RECOGNITION CAMERA

(a) Adjust the object recognition camera Adjustments.