Operation Check

THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): OPERATION CHECK

1. OPERATION DESCRIPTION

(a) Smart ignition function:

(1) When the key is in the detection area inside the vehicle and the brake pedal is depressed, the hybrid control system is started by pressing the power switch.

(2) When the key is in the detection area inside the vehicle and the brake pedal is not depressed, the power source mode is changed by pressing the power switch. The power source mode changes in the following order every time the power switch is pressed: off -> on (ACC) -> on (IG) -> off.

(3) After getting into the vehicle while carrying the key when the power switch is off, if the power switch is pressed while not depressing the brake pedal, the power source mode changes to ACC and the power switch indicator illuminates in amber.

(4) After getting into the vehicle while carrying the key when the power switch is off, if the brake pedal is depressed while park (P) is selected, the power switch indicator illuminates in green.

(5) The hybrid control system starts if the power switch is pressed when the power switch indicator is illuminated in green.

(b) Changing the power source mode when the key does not operate correctly due to wave interference or key battery depletion:

(1) Unlock the door using the built-in mechanical key and get into the vehicle while carrying the key.

(2) While depressing the brake pedal, hold the ornament side of the key against the power switch.

(3) When a buzzer sound is heard from the buzzer in the combination meter, release the brake pedal within 10 seconds. By pressing the power switch while not depressing the brake pedal, the power source mode changes in the following order every time the power switch is pressed: off -> on (ACC) -> on (IG) -> off.

(c) Starting the hybrid control system when the key does not operate correctly due to wave interference or key battery depletion:

(1) Unlock the door using the built-in mechanical key and get into the vehicle while carrying the key.

(2) While depressing the brake pedal with park (P) is selected, hold the ornament side of the key against the power switch.

(3) When a buzzer sound is heard from the buzzer in the combination meter and the power switch indicator illuminates in green, press the power switch within 10 seconds while keeping the brake pedal depressed to start the hybrid control system.

2. CHECK SMART IGNITION FUNCTION

(a) Check the smart ignition function:

(1) Get into the vehicle while carrying the key with the power switch off. With park (P) is selected, check that the power switch indicator illuminates in green when the brake pedal is depressed. Then check that the hybrid control system starts when the power switch is pressed after the power switch indicator illuminates in green.

(2) While the brake pedal is released and the key is being carried, check that the power source mode changes in the following order when the power switch is pressed: off -> on (ACC) -> on (IG) -> off.

HINT
When the power switch is pressed with the power switch on (IG) and park (P) not selected, the power source mode change to off.

(3) Check the smart ignition operation range for the front side. Place the key in either of the two locations making sure that the key is oriented as shown in the illustration, and then check that the hybrid control system can be started.





Text in Illustration





NOTICE:
* Even if the key is in the vehicle interior key detection area, the key may not be properly detected if the key is on the instrument panel, in the glove box or on the floor.
* If the key is within 0.2 m (0.66 ft.) of the shift position, communication may not be possible.

HINT
Perform this inspection for both inspection points.

(4) Check the smart ignition operation range for the rear side. Place the key in either of the two locations making sure that the key is oriented as shown in the illustration, and then check that the hybrid control system can be started.





Text in Illustration





NOTICE:
* Even if the key is in the vehicle interior key detection area, the key may not be properly detected if the key is on the instrument panel, in the glove box or on the floor.
* If the key is within 0.2 m (0.66 ft.) of the center of the rear seat, communication may not be possible.

HINT
Perform this inspection for both inspection points.

(5) Check the smart ignition operation range for the luggage compartment. Place the key in either of the two locations making sure that the key is oriented as shown in the illustration, and then check that the hybrid control system can be started.





Text in Illustration





HINT
Perform this inspection at both locations in the luggage compartment.

3. CHECK POWER SOURCE MODE CHANGING FUNCTION

(a) Check the power switch.

(1) Check that the power source mode changes according to the chart below.





4. CHECK POWER SOURCE MODE INDICATION





Text in Illustration





(a) Check the power switch indicator.

Indicator Inspection





HINT

*: Conditions in which hybrid control system can be started is as follows:





* *: When the key is in the vehicle, the ID code sent as a result from communication between the key and certification ECU (smart key ECU assembly) and the ID code calculated by the certification ECU (smart key ECU assembly) are compared. If the ID codes match each other, the vehicle recognizes that the key is in the vehicle.

(1) Indicator Condition Chart