Customize Parameters

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE METER / GAUGE SYSTEM

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus:

1 for Warning: Customize Setting / Combination Meter / Warning.

2 for Display: Customize Setting / Combination Meter / Display.

(5) Select the setting by referring to the table below.

NOTICE:
* Be sure to record the current value before customizing.

HINT
The following items can be customized using the Techstream.

Warning





* *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

* *2: w/ Rear Seat Belt Reminder

(b) Customizing with the combination meter assembly

HINT
* Press and hold the DISP switch (steering pad switch assembly) when entering an item.
* Briefly press the DISP switch (steering pad switch assembly) when selecting an item.

(1) Turn the power switch on (IG).

(2) Select the following menus: SETTINGS / METER SETTING.

(3) Select the setting by referring to the table below.

NOTICE:
* Be sure to record the current value before customizing.

HINT
The following items can be customized operating the combination meter assembly.

Meter Setting





(4) Press and hold DISP switch (steering pad switch assembly).

(5) The setting completion screen will be displayed.

(6) Return to the item selection screen.