Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

9. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

10. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly

11. REMOVE DOOR ARMREST COVER (for Driver Side) Disassembly

12. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side) Disassembly

13. REMOVE DOOR ASSIST GRIP COVER (for Front Passenger Side) Disassembly

14. REMOVE DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side) Disassembly

15. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Disassembly

16. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side) Disassembly

17. REMOVE FRONT DOOR TRIM BRACKET (for Driver Side) Disassembly

18. REMOVE FRONT DOOR TRIM BRACKET (for Front Passenger Side) Disassembly

19. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

20. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

21. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY Disassembly

22. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and front power window regulator motor assembly.