Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ( Repair Instruction - Initialization).

8. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG Disassembly

9. REMOVE REAR DOOR REAR FRAME BRACKET Disassembly

10. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL Disassembly

11. REMOVE REAR DOOR ARMREST COVER Disassembly

12. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

13. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP Disassembly

14. REMOVE REAR DOOR TRIM BRACKET Disassembly

15. REMOVE REAR DOOR SERVICE HOLE COVER Disassembly

16. REMOVE REAR DOOR CHECK ASSEMBLY Disassembly

17. REMOVE REAR DOOR WEATHERSTRIP Disassembly

18. REMOVE REAR DOOR GLASS RUN Disassembly

19. REMOVE NO. 1 REAR DOOR VENT SEAL Disassembly

20. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY Disassembly

21. REMOVE REAR DOOR QUARTER WINDOW GLASS Disassembly

22. REMOVE REAR DOOR GLASS SUB-ASSEMBLY Disassembly

23. REMOVE REAR DOOR WINDOW REGULATOR ASSEMBLY Disassembly

24. REMOVE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and rear power window regulator motor assembly.