B2785

ENGINE IMMOBILIZER: ENGINE IMMOBILIZER SYSTEM: B2785: Communication Malfunction between ECUs Connected by LIN
B2785 - Communication Malfunction between ECUs Connected by LIN

DESCRIPTION

This DTC is output when LIN communication from the certification ECU stops for a certain amount of time.

HINT
If this DTC B2785 is detected simultaneously with DTC B2786 , B2789 or B2287, troubleshoot DTC B2786, B2789 or B2287 first.





o: DTC is output

-: DTC is not output





WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
* If the certification ECU or ID code box is replaced, register the key and ECU communication ID Registration.
* If the steering lock ECU or main body ECU is replaced, register the ECU code and ECU communication ID Registration.

PROCEDURE

1. CHECK DTC OUTPUT

(a) Delete the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Recheck for DTCs Reading and Clearing Diagnostic Trouble Codes.

Result:





B -- USE SIMULATION METHOD TO CHECK
A -- Continue to next step.

2. REPLACE CERTIFICATION ECU

(a) Replace the certification ECU.

NEXT -- Continue to next step.

3. ELECTRICAL KEY REGISTRATION

(a) Register the electrical key code in the certification ECU Registration.

NEXT -- Continue to next step.

4. ECU COMMUNICATION ID REGISTRATION

(a) Register the ECU communication ID between the ID code box and ECM Registration.

NEXT -- Continue to next step.

5. CHECK DTC OUTPUT

(a) Delete the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Recheck for DTCs Reading and Clearing Diagnostic Trouble Codes.

Result:





B -- END
A -- Continue to next step.

6. REPLACE MAIN BODY ECU

(a) Replace the main body ECU.

NEXT -- Continue to next step.

7. ECU CODE REGISTRATION

(a) Register the ECU code between the ECUs connected by LIN communication Registration.

NEXT -- Continue to next step.

8. CHECK DTC OUTPUT

(a) Delete the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Recheck for DTCs Reading and Clearing Diagnostic Trouble Codes.

Result:





B -- END
A -- Continue to next step.

9. REPLACE STEERING LOCK ECU

(a) Replace the steering lock ECU.

NEXT -- Continue to next step.

10. ECU CODE REGISTRATION

(a) Register the ECU code between the ECUs connected by LIN communication Registration.

NEXT -- Continue to next step.

11. CHECK DTC OUTPUT

(a) Delete the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Recheck for DTCs Reading and Clearing Diagnostic Trouble Codes.

Result:





B -- END

A -- REPLACE ID CODE BOX