Rear Power Window Switch RH Circuit

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Rear Power Window Switch RH Circuit
- Rear Power Window Switch RH Circuit

DESCRIPTION

This circuit supplies power to operate the power window regulator switch (Rear RH).

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR SWITCH

(a) Disconnect the J4 connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPLACE POWER WINDOW REGULATOR SWITCH
OK -- Continue to next step.

2. CHECK WIRE HARNESS (POWER WINDOW REGULATOR SWITCH - POWER WINDOW ECU)

(a) Disconnect the J3 and J4 connectors.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- END