Installation

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY





(a) Install the retainer to the luggage compartment door with the 2 clips.

(b) Install the 2 screws.

2. INSTALL LICENSE PLATE LIGHT ASSEMBLY





(a) Install the license plate light to the luggage compartment door with the 2 screws.





Connect the connector.

3. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE

4. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY





(a) Install the switch to luggage compartment door with the 2 screws.

(b) Connect the connector.

5. INSTALL LUGGAGE COMPARTMENT DOOR COVER Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.