Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

2. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE CONSOLE BOX PLATE Removal

6. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

7. REMOVE CONSOLE BOX Removal

8. REMOVE NO. 2 CONSOLE BOX DUCT

(a) Remove the 2 clips and No. 2 console box duct.





9. REMOVE NO. 1 CONSOLE BOX DUCT

(a) Remove the clip and No. 1 console box duct.





10. REMOVE YAW RATE SENSOR

(a) Disconnect the 2 wire harness clamps.





(b) Remove the 2 bolts and sensor.

NOTICE:
Do not remove the sensor from the bracket.

(c) Disconnect the sensor connector.