Removal

THEFT DETERRENT / KEYLESS ENTRY: SECURITY INDICATOR LIGHT ASSEMBLY: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) Removal

7. REMOVE REMOTE TOUCH ASSEMBLY (w/ Navigation System) Removal

8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE RADIO RECEIVER WITH INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

10. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Manual (SOS) Switch) Removal

11. REMOVE NO. 1 RADIO BRACKET Removal

12. REMOVE NO. 2 RADIO BRACKET Removal

13. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

(a) Disengage the 2 claws.





(b) Disengage the 2 guides and remove the integration control and panel assembly from the radio receiver assembly.