Removal

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: REMOVAL

1. PRECAUTION

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 10 Speakers) Removal

7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 15 Speakers) Removal

8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

(a) Remove the 2 bolts.





(b) Disengage the 2 claws and remove the center instrument cluster finish panel assembly as shown in the illustration.