Pinout Values and Diagnostic Parameters

DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER SYSTEM: TERMINALS OF ECU

1. CHECK MAIN BODY ECU (Multiplex NETWORK BODY ECU)

(a) Disconnect the 2B, 2C and F7 connectors.





(b) Measure the resistance and voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the 2B, 2C and F7 connectors.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.