Installation
2AZ-FXE COOLING: THERMOSTAT: INSTALLATION
1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.
(b) Install the thermostat with the jiggle valve facing upward.
Text in Illustration
HINT
The jiggle valve may be set to within 10° on either side of the prescribed position.
2. INSTALL WATER INLET
(a) Install the water inlet with the 2 nuts.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
3. CONNECT NO. 2 RADIATOR HOSE Installation
4. ADD COOLANT (for Engine) Service and Repair
5. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection
6. INSTALL NO. 1 ENGINE UNDER COVER