Removal

2AZ-FXE COOLING: EXHAUST PIPE GAS CONTROL ACTUATOR: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE FRONT NO. 3 ENGINE UNDER COVER

3. DRAIN ENGINE COOLANT (for Engine) Service and Repair

4. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR

NOTICE:
When removing the exhaust pipe gas control actuator, use caution because coolant may spill out from the exhaust heat recirculation system.

(a) Check that the coolant is cool enough.

(b) Check that there is clearance between the rod end and the lever.





(c) Disconnect the 2 water hoses.





(d) Remove the 3 bolts, 3 nuts, gasket and exhaust pipe gas control actuator case.





(e) While closing port A, apply compressed air to port B to remove the exhaust pipe gas control actuator shown in the illustration.





Text in Illustration





HINT
Use a piece of cloth to catch the exhaust pipe gas control actuator.

(f) Remove the exhaust pipe gas control stopper.