Removal
HYBRID / BATTERY CONTROL: HYBRID VEHICLE CONTROL ECU: REMOVAL
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal
4. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY
HINT
Removal.
5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
7. REMOVE AIR CLEANER CASE Removal
8. REMOVE HYBRID VEHICLE CONTROL ECU
(a) Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 connectors.
(b) Remove the 2 bolts.
(c) Disconnect the clamp and remove the hybrid vehicle control ECU.
(d) Remove the 4 screws and 2 ECM brackets.