Removal

2AZ-FXE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

2. REMOVE FRONT WIPER MOTOR AND LINK

HINT
Removal.

3. REMOVE WATER GUARD PLATE RH Removal

4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

5. REMOVE COWL BODY MOUNTING REINFORCEMENT RH Removal

6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Disconnect the oil pressure switch assembly connector.

(b) Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.