Removal
P311 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL
NOTICE:
If the shift lock control unit assembly is to be replaced with a new one, it is necessary to clear the learned shift sensor voltage value by disconnecting and reconnecting the cable of the negative (-) battery terminal Service Precautions.
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) Removal
7. REMOVE REMOTE TOUCH ASSEMBLY (w/ Navigation System) Removal
8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal
9. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY Removal
10. REMOVE FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure as for the LH side Removal.
11. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure as for the LH side Removal.
12. REMOVE COWL SIDE TRIM BOARD RH
HINT
Use the same procedure as for the LH side Removal.
13. REMOVE INSTRUMENT SIDE PANEL RH Removal
14. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
15. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
16. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
17. REMOVE FRONT CONSOLE BOX COVER Removal
18. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/o Seat Heater System) Removal
19. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/ Seat Heater System) Removal
20. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY Removal
21. REMOVE CONSOLE BOX CARPET Removal
22. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY Removal
23. REMOVE CONSOLE BOX LH Removal
24. REMOVE CONSOLE BOX RH Removal
25. REMOVE CONSOLE BOX Removal
26. REMOVE TRANSMISSION INSTRUMENT PANEL SHIFT ASSEMBLY
(a) Remove the 3 nuts and separate the transmission instrument panel shift assembly.
(b) Disconnect the 3 connectors to remove the transmission instrument panel shift assembly.
