Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION

1. INSTALL NAVIGATION ECU

(a) Install the navigation ECU with the 4 screws.





(b) Connect each connector to install the harness.





(c) Engage the clamp.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY Installation

3. INSTALL NO. 2 RADIO BRACKET Installation

4. INSTALL NO. 1 RADIO BRACKET Installation

5. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

9. INSTALL INSTRUMENT PANEL COIN BOX (w/o Ashtray) Installation

10. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

14. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

15. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

17. INSERT MAP DISC

(a) Remove the clock assembly.





(b) Turn the engine switch on (ACC).

(c) Insert the map disc.

(d) Check that the wire harness is in the position shown in the illustration.





Text in Illustration





(e) Engage the 2 craws and install the clock assembly.





18. ADJUST CLOCK