B2534
SLIDING ROOF / CONVERTIBLE: RETRACTABLE HARDTOP SYSTEM: B2534: Package Tray Switch No. 1 or No. 2 Malfunction
B2534 - Package Tray Switch No. 1 or No. 2 Malfunction
DESCRIPTION
The package tray trim bracket (No. 1, No. 2 and No. 3 main package tray switches) detects the main package tray position. The switches sends their signals to the sliding roof control ECU assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. INSPECT PACKAGE TRAY TRIM BRACKET (PT1)
(a) Check that the wire harness of the No. 1 main package tray switch has not been pinched by the body.
(b) Disconnect the P60 connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPLACE PACKAGE TRAY TRIM BRACKET
OK -- Continue to next step.
2. INSPECT PACKAGE TRAY TRIM BRACKET (PT2)
(a) Check that the wire harness of the No. 2 main package tray switch has not been pinched by the body.
(b) Disconnect the P60 connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPLACE PACKAGE TRAY TRIM BRACKET
OK -- Continue to next step.
3. INSPECT PACKAGE TRAY TRIM BRACKET (PT3)
(a) Check that the wire harness of the No. 3 main package tray switch has not been pinched by the body.
(b) Disconnect the P60 connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPLACE PACKAGE TRAY TRIM BRACKET
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (PACKAGE TRAY TRIM BRACKET - SLIDING ROOF CONTROL ECU)
(a) Disconnect the P60 and P53 connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. INSPECT PACKAGE TRAY TRIM BRACKET (PT1, PT2, PT3)
(a) Measure the resistance according to the value(s) in the table below.
NOTICE:
Manually move the package tray trim bracket to the position in the table below Procedures.
HINT
* Retractable hardtop open operation: CLOSE 1 -> OPEN -> CLOSE 1
* Retractable hardtop close operation: CLOSE 2 -> CLOSE 1 -> OPEN -> CLOSE 1
Text in Illustration
Standard Resistance:
NG -- REPLACE PACKAGE TRAY TRIM BRACKET
OK -- REPLACE SLIDING ROOF CONTROL ECU ASSEMBLY