B2546

SLIDING ROOF / CONVERTIBLE: RETRACTABLE HARDTOP SYSTEM: B2546: Combination Meter ECU Communication Stop
B2546 - Combination Meter ECU Communication Stop

DESCRIPTION

The sliding roof control ECU assembly receives vehicle speed signal via BEAN communication from the combination meter assembly and changes operation permission condition of the metal top system.





WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
The retractable hardtop system uses a multiplex communication system. Inspect the communication function by following How to Proceed with Troubleshooting How To Proceed With Troubleshooting. Troubleshoot the retractable hardtop system after confirming that the communication system is functioning properly.

PROCEDURE

1. REPLACE COMBINATION METER ASSEMBLY

(a) Replace the combination meter assembly.

NEXT -- Continue to next step.

2. CLEAR DTC

(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.

NEXT -- Continue to next step.

3. CHECK FOR DTC

(a) Recheck for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC B2546 is not output.

NG -- REPLACE SLIDING ROOF CONTROL ECU ASSEMBLY

OK -- END (COMBINATION METER ASSEMBLY WAS DEFECTIVE)