Removal

A760E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL

1. DRAIN AUTOMATIC TRANSMISSION FLUID

(a) Remove the drain plug and gasket, and drain the ATF.

(b) Install a new gasket and the drain plug.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

NOTICE:
Some fluid will remain in the oil pan.

(a) Remove the 20 bolts, oil pan and gasket.





(b) Remove the 3 magnets from the oil pan.





Text in Illustration





(c) Examine particles in the pan.

(1) Collect any steel chips with the removed magnets.

Carefully look for the foreign objects and particles in the pan and on the magnets to guess the type of wear which might be found in the transmission.

Result:

Steel (magnetic)
Bearing, gear and plate wear

Brass (non-magnetic)
Bushing wear

3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

(a) Remove the 4 bolts and oil strainer.





NOTICE:
Be careful as some fluid will come out of the oil strainer.

(b) Remove the O-ring from the oil strainer.





Text in Illustration





4. DISCONNECT TRANSMISSION WIRE

(a) Remove the bolt and clamp, and separate the ATF temperature sensor.





(b) Remove the 2 bolts and disconnect the 2 clamps.





(c) Disconnect the 9 connectors from the solenoid valves.





5. REMOVE TRANSMISSION WIRE

(a) Disconnect the transmission wire connector.

(b) Remove the bolt and pull out the transmission wire.





(c) Remove the O-ring from the transmission wire.





Text in Illustration