Jam Protection Function Does Not Operate

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: Jam Protection Function does not Operate
- Jam Protection Function does not Operate

DESCRIPTION

This symptom may occur for any of the front windows.

The jam protection function operates within a specified range during the manual up* or auto up operation.

*: w/ for Korea except for Front Passenger Side

INSPECTION PROCEDURE

NOTICE:
* When the power window regulator master switch assembly or power window regulator switch assembly is removed, the power window control system must be initialized Initialization.
* The power window control system uses a BEAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting How To Proceed With Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

PROCEDURE

1. PERFORM INITIALIZATION (POWER WINDOW CONTROL SYSTEM (APPLICABLE LOCATION))

(a) Initialize the power window control system (applicable location) Initialization.

NEXT -- Continue to next step.

2. CHECK JAM PROTECTION FUNCTION OPERATING RANGE

(a) Check if the jam protection function operates normally for the applicable power window.

HINT
The jam protection function will not operate within 15 mm (0.591 in.) of the fully closed position.

OK:

Jam protection function operates normally.

Result:





C -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY Removal

B -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Removal

A -- END (INITIALIZATION WAS INCORRECT)