Radiator Cooling Fan Motor Relay: Testing and Inspection

2UR-GSE COOLING: RELAY: ON-VEHICLE INSPECTION

1. INSPECT FAN NO. 1 RELAY

(a) Remove the relay from the engine room No. 1 relay block.





(b) Measure the resistance of the relay.

Standard Resistance:





If the result is not as specified, replace the relay.

(c) Install the relay to the engine room No. 1 relay block.

2. INSPECT FAN NO. 2 RELAY

(a) Remove the relay from the engine room No. 1 relay block.





(b) Measure the resistance of the relay.

Standard Resistance:





If the result is not as specified, replace the relay.

(c) Install the relay to the engine room No. 1 relay block.