Removal

HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Removal.

3. REMOVE FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side Removal.

4. REMOVE SIDE INSTRUMENT PANEL RH Removal

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

8. REMOVE NO. 2 AIR DUCT

(a) Remove the screw and No. 2 air duct.





9. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the screw and air conditioning amplifier assembly.