Operation CHARM: Car repair manuals for everyone.

Installation





2UR-GSE LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Apply adhesive to 2 or 3 threads of the oil pressure switch.





Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(b) Using SST, install the oil pressure switch.





SST : 09922-10010

without SST - Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

with SST - Torque : 8.0 Nm (81 kgf-cm, 71 in-lbf)

NOTICE:
* Use a torque wrench with a fulcrum length of 155 mm (6.10 in.).
* Do not start the engine for at least 1 hour after installing the switch.

(c) Connect the oil pressure switch connector.

2. ADD ENGINE OIL Replacement

3. INSPECT FOR OIL LEAK

4. INSTALL ENGINE UNDER COVER