Removal

AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

5. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal

6. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Removal

7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Removal

8. REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray) Removal

9. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Removal

10. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Removal

11. REMOVE CONSOLE BOX Removal

12. REMOVE NO. 2 CONSOLE BOX DUCT Removal

13. REMOVE NO. 2 FLOOR UNDER COVER Removal

14. REMOVE NO. 1 FLOOR UNDER COVER Removal

15. REMOVE TAIL EXHAUST PIPE ASSEMBLY Removal

16. REMOVE REAR NO. 1 FLOOR PANEL BRACE Removal

17. REMOVE FRONT CENTER FLOOR BRACE Removal

18. DISCONNECT HEATED OXYGEN SENSOR Removal

19. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

20. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR Removal

21. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Set the shift lever to N.

(b) Remove the nut and separate the floor shift gear shifting rod sub-assembly.





22. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Disconnect the 2 connectors.





(b) Remove the 4 clamps.

(c) Remove the 4 bolts.

(d) Remove the floor shift assembly.