Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL Disassembly

4. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP Disassembly

7. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

8. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Disassembly

10. REMOVE FRONT POWER WINDOW REGULATOR MOTOR

(a) Using a "TORX" socket wrench (T25), remove the 3 screws and the front power window regulator motor.