Removal

ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

(a) Remove the 3 clips and door hinge cover.

2. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

(a) Remove the 3 clips and door hinge cover.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

(a) Detach the 2 clips and remove the deck trim side board LH.

5. REMOVE BATTERY SERVICE HOLE COVER LH

(a) Detach the clip, fastening tape and remove the battery service hole cover.

6. REMOVE ROPE HOOK

(a) Remove the 4 rope hooks by pushing the claws in the direction of the arrows in the illustration.

7. REMOVE ROPE HOOK ASSEMBLY

(a) Remove the 4 bolts and 4 rope hooks.

8. REMOVE DECK TRIM SIDE BOARD RH

(a) w/ Spare Tire:

(1) Remove the clip.

(2) Remove the deck trim side board.

(b) w/o Spare Tire:

(1) Detach the clip and remove the deck trim side board.

9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and remove the light assembly.

HINT
Tape the screwdriver tip before use.

(b) Disconnect the connector.

10. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal

11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) Remove the 3 clips.

(b) Detach the 4 claws and remove the trim.

12. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

13. REMOVE TOOL BOX (w/o Spare Tire) Removal

14. REMOVE REAR FLOOR FINISH PLATE

(a) Remove the 3 clips.

(b) Detach the 4 clips and finish plate.

15. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

(a) Remove the 2 clips.

(b) Detach the claw and luggage compartment trim cover.

16. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

(a) Remove the 2 clips.

(b) Detach the claw and luggage compartment trim cover.

17. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH

(a) Detach the 3 clips and luggage door wire.

(b) Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

(d) Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and body RH side as shown in the illustration.

SST : 09804-24010

18. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH

(a) Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

(b) Remove the luggage door hinge torsion bar LH from the body RH side as shown in the illustration.

(c) Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and body LH side as shown in the illustration.

SST : 09804-24010

19. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

(a) Squeeze the two sides of the torsion bar support indicated by the arrows and remove it as shown in the illustration.