Control Valve Assembly (for Rear Side)

SUSPENSION CONTROL: CONTROL VALVE ASSEMBLY (for Rear Side): INSPECTION

1. INSPECT NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:





If the result is not as specified, replace the No. 2 height control valve sub-assembly.





Check the height control valve operation.

(1) Apply battery voltage to the exhaust valve and check the operating sound of the height control valve.

OK:





If the result is not as specified, replace the No. 2 height control valve sub-assembly.