Navigation System (For HDD)

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): TERMINALS OF ECU

1. NAVIGATION COMPUTER SUB-ASSEMBLY

* *1: w/o Manual (SOS) Switch

* *2: w/ Manual (SOS) Switch

* *3: w/ Rear View Monitor System

* *4: w/ DVD Changer

(a) Reference (Oscilloscope waveform):

(1) Waveform 1 (camera lens is not covered, displaying an image)

HINT
The video waveform changes according to the image from the rear television camera assembly.

(2) Waveform 2 (camera lens is covered, blacking out the screen)

HINT
The video waveform changes according to the image from the rear television camera assembly.

(b) Reference (Oscilloscope waveform):

(1) Waveform 3

HINT
The video waveform changes according to the image input from the radio receiver assembly to the navigation computer sub-assembly, but the synchronization signal does not change.

(c) Reference (Oscilloscope waveform):

(1) Waveform 4

HINT
The video waveform changes according to the image output from the navigation computer sub-assembly to the multi-display, but the synchronization signal does not change.

Text in Illustration

2. CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (MULTI-DISPLAY)

(a) Reference (Oscilloscope waveform):

(1) Waveform 6

HINT
The video waveform changes according to the image input from the navigation computer sub-assembly to the multi-display, but the synchronization signal does not change.

Text in Illustration

3. MULTI-DISPLAY

(a) Reference (Oscilloscope waveform):

(1) Waveform 7

4. DISPLAY MODULE BOARD

5. REMOTE TOUCH

6. RADIO RECEIVER ASSEMBLY Audio and Visual System (W/ Navigation System)

7. STEREO COMPONENT AMPLIFIER ASSEMBLY Audio and Visual System (W/ Navigation System)

8. CENTER CLUSTER MODULE CIRCUIT Pinout Values and Diagnostic Parameters

9. MULTI-MEDIA INTERFACE ECU ASSEMBLY Audio and Visual System (W/ Navigation System)

10. DCM (TELEMATICS TRANSCEIVER) (w/ Manual (SOS) Switch) Safety Connect System