Trunk / Liftgate Lock: Testing and Inspection

DOOR LOCK: BACK DOOR LOCK: INSPECTION

1. INSPECT BACK DOOR LOCK ASSEMBLY

(a) Check the operation of the door lock motor.

(1) Move the door lock to the lock position.





(2) Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.

OK:





If the result is not as specified, replace the back door lock assembly.

(b) Check the operation of the door courtesy switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the back door lock assembly.