Component Tests and General Diagnostics

LIGHTING (INT): PERSONAL LIGHT: INSPECTION

1. INSPECT MAP LIGHT ASSEMBLY

(a) Inspect the interior light door switch.





(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the map light assembly.

(b) Inspect the map lights.

(1) Connect a positive (+) lead from the auxiliary battery to terminal 21 (+B1) and a negative (-) lead to terminal 15 (GND1) or 1 (CTY).

Result:





If the result is not as specified, replace the bulb or map light assembly.

(c) Inspect the center console spot light.

(1) Connect a positive (+) lead from the auxiliary battery to terminal 21 (+B1) and a negative (-) lead to terminal 5 (ILLB) or 6 (ILLB).

Result:





If the result is not as specified, replace the map light assembly.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the map light assembly.